IOW BLOCK,DS BLOCK and FBH BLOCK SETS

IOW BLOCK



Product description:

Used for beam profile measurement of angle beam transducers and measurement of transducer angles.
Contains nine 1.5mm diameter x 22mm deep side drilled holes.
In accordance with British Standard 2704 requirements.
Dimensions: 305mm x 75mm x 50mm
Made from carbon steel
Fitted wooden storage case optional

DS BLOCK

Product description:

 AWS-type block used for longitudinal distance and sensitivity calibration.
Contains a 2.0″ high section between two 4.0″ sections.
In accordance with AWS requirements…


 FBH BLOCK SETS


Product description:

Set of nineteen flat-bottom hole blocks used to determine the relationship between metal travel distance (MTD) and signal amplitude.
All blocks have the same size flat-bottom hole and varying MTD.
Hole diameter must be specified when ordering (3/64”, 5/64” or 8/64”).
In accordance with ASTM E428.

To know more details please CLICK

Comments

Post a Comment

Popular posts from this blog

Ultrasonic Testing Level 1 (UT-1) General &Specific Examination MCQ questions

ULTRASONIC TESTING (UT) Ultrasonic Testing Level 1 (UT-1) General Examination 1.       The divergence of an ultrasonic beam is dependent on: (a) Transducer wavelength and diameter (b) Test specimen density (c) The sound wave's angle of incidence (d) The degree of damping of the ultrasonic transducer 2. When a longitudinal wave is incident upon an inclined interface between zero degrees and the first critical angle: (a) The sound beam is totally reflected (b) Only shear waves are produced in the second material (c) Shear waves and longitudinal waves are produced in the second material (d) Only longitudinal waves are produced in the second material 3. The piezoelectric material in a search unit which vibrates to produce ultrasonic waves is called: (a) A backing material (b) A lucite wedge (c) A transducer element or crystal (d) A couplant 4. When a longitudinal wave is incident upon an inclined interface and is refracted at ninety degre
Read more

Image Quality Indicator (IQI) wire type

Image
Image Quality Indicator (IQI) wire type Product description: Available in wire length: 50 mm 25mm 10mm (2”,1”,3/8”) material: Standard stainless steel (for all steels), Aluminium, Copper (Nickel, Inconel, Titanium available upon Request) A} WIRE TYPE 1QI’S AS PER EN – 462 – 11 FE EN, 6FE EN, 10 FE EN, 13FE EN B} WIRE TYPE 1QI’S AS PER EN – 747 Set A, Set B, Set C, Set, D C} WIRE TYPE 1QI’S AS PER1     BRITISH STANDARDS BS- 379 D} WIRE TYPE 1QI’S AS PER IS – 3657      FE-1, FE-2, FE-3, FE-4, FE-5 Cranking Unit Product description: Available in various specifications, the offered product is highly appreciated in the market for its unmatched quality. Our offered product is not only manufactured using advanced technology but also verified on various quality parameters to ensure its flawlessness.   Guide tube and extension tube Product description: Source Guide Tube – 2 Meters long Extension Tube – 2 Meters long  Personal protection items
Read more

PENETRANT TESTING MATERIALS

Image
Penetrant Testing Materials The penetrant materials used today are much more sophisticated than the kerosene and whiting first used by railroad inspectors near the turn of the 20th century.  Today's penetrants are carefully formulated to produce the level of sensitivity desired by the inspector.  To perform well, a penetrant must possess a number of important characteristics. A penetrant must: spread easily over the surface of the material being inspected to provide complete and even coverage. be drawn into surface breaking defects by capillary action. remain in the defect but remove easily from the surface of the part. remain fluid so it can be drawn back to the surface of the part through the drying and developing steps. be highly visible or fluoresce brightly to produce easy to see indications. not be harmful to the material being tested or the inspector. All penetrant materials do not perform the same and are not designed to perform the same. Penetrant man
Read more