ET Equipments:EDDY CURRENT CALIBRATION BLOCKS and EDM NOTCH BLOCK

ET Equipments


EDDY CURRENT CALIBRATION BLOCKS



ET WELD BLOCK





  • B lock Dimensions: .312″ thick x 1.375″ wide x 3.156″ long ·
  • Three slots sizes: 0.5,0.1,0.2 ” deep ·
  • Tolerance is +/- .001″ on notches.
  • The widest notch is .006″ with a tolerance of +/- .001.
  • Notch Width: .006

EDM NOTCH BLOCK




  • This block contains nine EDM slots from 0.100″ to 0.900″ deep.
  • Slot width is 0.011″.
  • Nominal depth is laser engraved on the side of the block.
  • Available in most alloys by request.                                                                                                                                                                                                                                             To know more details Please visit our website link CLICK

Comments

Post a Comment

Popular posts from this blog

Ultrasonic Testing Level 1 (UT-1) General &Specific Examination MCQ questions

ULTRASONIC TESTING (UT) Ultrasonic Testing Level 1 (UT-1) General Examination 1.       The divergence of an ultrasonic beam is dependent on: (a) Transducer wavelength and diameter (b) Test specimen density (c) The sound wave's angle of incidence (d) The degree of damping of the ultrasonic transducer 2. When a longitudinal wave is incident upon an inclined interface between zero degrees and the first critical angle: (a) The sound beam is totally reflected (b) Only shear waves are produced in the second material (c) Shear waves and longitudinal waves are produced in the second material (d) Only longitudinal waves are produced in the second material 3. The piezoelectric material in a search unit which vibrates to produce ultrasonic waves is called: (a) A backing material (b) A lucite wedge (c) A transducer element or crystal (d) A couplant 4. When a longitudinal wave is incident upon an inclined interface and is refracted at ninety degre
Read more

IOW BLOCK,DS BLOCK and FBH BLOCK SETS

Image
IOW BLOCK Product description: Used for beam profile measurement of angle beam transducers and measurement of transducer angles. Contains nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements. Dimensions: 305mm x 75mm x 50mm Made from carbon steel Fitted wooden storage case optional DS BLOCK Product description: AWS-type block used for longitudinal distance and sensitivity calibration. Contains a 2.0″ high section between two 4.0″ sections. In accordance with AWS requirements…   FBH BLOCK SETS Product description: Set of nineteen flat-bottom hole blocks used to determine the relationship between metal travel distance (MTD) and signal amplitude. All blocks have the same size flat-bottom hole and varying MTD. Hole diameter must be specified when ordering (3/64”, 5/64” or 8/64”). In accordance with ASTM E428. To know more details please   CLICK
Read more

Image Quality Indicator (IQI) wire type

Image
Image Quality Indicator (IQI) wire type Product description: Available in wire length: 50 mm 25mm 10mm (2”,1”,3/8”) material: Standard stainless steel (for all steels), Aluminium, Copper (Nickel, Inconel, Titanium available upon Request) A} WIRE TYPE 1QI’S AS PER EN – 462 – 11 FE EN, 6FE EN, 10 FE EN, 13FE EN B} WIRE TYPE 1QI’S AS PER EN – 747 Set A, Set B, Set C, Set, D C} WIRE TYPE 1QI’S AS PER1     BRITISH STANDARDS BS- 379 D} WIRE TYPE 1QI’S AS PER IS – 3657      FE-1, FE-2, FE-3, FE-4, FE-5 Cranking Unit Product description: Available in various specifications, the offered product is highly appreciated in the market for its unmatched quality. Our offered product is not only manufactured using advanced technology but also verified on various quality parameters to ensure its flawlessness.   Guide tube and extension tube Product description: Source Guide Tube – 2 Meters long Extension Tube – 2 Meters long  Personal protection items
Read more