Quality Control of Dwell

Quality Control of Dwell


          The dwell step involves allowing the test component to sit for a sufficient period of time for the penetrant to fill any surface breaking defects that happen to be present. There are basically two dwell modes, immersion-dwell and drain-dwell. The drain-dwell mode has been shown to produce the most sensitive results. The only real quality control required in the dwell step of the process is to ensure that a minimum dwell time is reached. Dwell times are usually recommended by the penetrant producer or required by the specification being followed. There is no harm in allowing a penetrant to dwell longer than the minimum time as long as the penetrant is not allowed to dry on the part.


Comments

Post a Comment

Popular posts from this blog

Ultrasonic Testing Level 1 (UT-1) General &Specific Examination MCQ questions

ULTRASONIC TESTING (UT) Ultrasonic Testing Level 1 (UT-1) General Examination 1.       The divergence of an ultrasonic beam is dependent on: (a) Transducer wavelength and diameter (b) Test specimen density (c) The sound wave's angle of incidence (d) The degree of damping of the ultrasonic transducer 2. When a longitudinal wave is incident upon an inclined interface between zero degrees and the first critical angle: (a) The sound beam is totally reflected (b) Only shear waves are produced in the second material (c) Shear waves and longitudinal waves are produced in the second material (d) Only longitudinal waves are produced in the second material 3. The piezoelectric material in a search unit which vibrates to produce ultrasonic waves is called: (a) A backing material (b) A lucite wedge (c) A transducer element or crystal (d) A couplant 4. When a longitudinal wave is incident upon an inclined interface and is refra...
Read more

ECT CALIBRATION TUBE

Image
ET CONDUCTIVITY BLOCK Many current conductivity specifications require the use of traceable conductivity standards prior to measuring unknown material. A wide variety of standards are available to cover the range from 10% to 100% IACS. These conductivity reference standards used with the FM-140XL enables verification of instrument calibration. They are available in up to three standards per set and housed in a protective wooden box. ECT CALIBRATION TUBE Large lists of tubing or plate ASME standards are available. Also we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards                                          ...
Read more

Internal Auditor Course – ISO-9001:2015 (QMS)

Internal Auditor Course – ISO-9001:2015 (QMS) We are very glad to introduce ourselves as one of the leading training provider in Trichy Tamil Nadu. Please find the   ISO 9001:2015, Auditor TRAINING PROGRAMME . Training Program for ISO 9001:2015 Awareness (1 Day Training Program) ​QMS Awareness Program  ​ Venue :  Trichy in our office premises itself. Course Days     :     1 Days. Course Timing :      10.00  to 18:30 QMS (ISO 9001:2015) Internal Auditor Training Program : (NON IRCA Approved) Venue                            :      Trichy in our office premises itself. Course Days                :       2 Days. Course Timing       ...
Read more