Magnetic Partical Testing Equipments


MT Equipments

Magnetic Particle Testing:

 Method description:

                   Magnetic particle testing is one of the very common NDT methods. The main application is in the automotive and aerospace industry, and also in energetics and transportation industry. Due to simple physical background this method is easy to perform and it is very often required during the maintenance of the plant. MT is able to detect the surface and sub-surface imperfections (cracks, porosity, inclusions etc.) in the ferromagnetic (Fe) material. For other materials (non-ferromagnetic) MT is not applicable.
Physical background

                  The ferromagnetic material becomes magnetically saturated if it is magnetized in a proper way. The material discontinuity has different magnetic properties (usually is non-magnetic – air inside of the crack, slug or gas in porosity). This inhomogeneity of the magnetic properties deforms magnetic field, its force lines step off the material to surface, and create the scatter magnetic flow. This flow holds the information about magnetic inhomogeneity. The magnetic powder is applied on the surface of the material. This powder is in place of the material magnetic properties fitted to the surface by the scattered magnetic flow. This fitted cluster of magnetic powder creates an indication. The indications have bright or colour contrast and could be easily seen on the background material. The MT is able to detect the imperfections from width of a few microns.

Our Magnetic Particle Testing Products
AC/DC YOKE

Product description:

  • Choice of constant level AC or variable intensity, pulsed Sold state circuit for infinitely variable (step less) potentiometric adjustment of DC magnetic field.
  • Articulated legs to suit differing component contours. Inter pole distance adjustable from 0 to 300mm.
  • Low power consumption/ Current draw at 220v, single phase-only 2amps.
  • Strong and intense magnetic field for superior sensitivity Portable & light weight – only 3.5 kgs.
  • Can be used for AC De-magnetisation too.
Core Benefits:
  • Used to find both surface and near-surface discontinuities
  • Articulating, double-jointed legs contour to part’s shape for superior contact
  • Solid state controls located in the yoke’s housing for maximum safety and reliability.                        To Order Please....

Comments

Post a Comment

Popular posts from this blog

Ultrasonic Testing Level 1 (UT-1) General &Specific Examination MCQ questions

ULTRASONIC TESTING (UT) Ultrasonic Testing Level 1 (UT-1) General Examination 1.       The divergence of an ultrasonic beam is dependent on: (a) Transducer wavelength and diameter (b) Test specimen density (c) The sound wave's angle of incidence (d) The degree of damping of the ultrasonic transducer 2. When a longitudinal wave is incident upon an inclined interface between zero degrees and the first critical angle: (a) The sound beam is totally reflected (b) Only shear waves are produced in the second material (c) Shear waves and longitudinal waves are produced in the second material (d) Only longitudinal waves are produced in the second material 3. The piezoelectric material in a search unit which vibrates to produce ultrasonic waves is called: (a) A backing material (b) A lucite wedge (c) A transducer element or crystal (d) A couplant 4. When a longitudinal wave is incident upon an inclined interface and is refra...
Read more

ECT CALIBRATION TUBE

Image
ET CONDUCTIVITY BLOCK Many current conductivity specifications require the use of traceable conductivity standards prior to measuring unknown material. A wide variety of standards are available to cover the range from 10% to 100% IACS. These conductivity reference standards used with the FM-140XL enables verification of instrument calibration. They are available in up to three standards per set and housed in a protective wooden box. ECT CALIBRATION TUBE Large lists of tubing or plate ASME standards are available. Also we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards                                          ...
Read more

Internal Auditor Course – ISO-9001:2015 (QMS)

Internal Auditor Course – ISO-9001:2015 (QMS) We are very glad to introduce ourselves as one of the leading training provider in Trichy Tamil Nadu. Please find the   ISO 9001:2015, Auditor TRAINING PROGRAMME . Training Program for ISO 9001:2015 Awareness (1 Day Training Program) ​QMS Awareness Program  ​ Venue :  Trichy in our office premises itself. Course Days     :     1 Days. Course Timing :      10.00  to 18:30 QMS (ISO 9001:2015) Internal Auditor Training Program : (NON IRCA Approved) Venue                            :      Trichy in our office premises itself. Course Days                :       2 Days. Course Timing       ...
Read more