DRILLED HOLE SIZING BLOCK,STEP WEDGES

DRILLED HOLE SIZING BLOCK





 Product description:

This block contains (9) 1/16″ diameter thru-holes located from 0.100″ to 0.900″ from the scanning surface.
Nominal location is laser engraved on the side of the block.
Dimensions: 1.000″ x 1.000″ x 10.000″
Made from 1018 Steel, Nickel plated.
Blocks can be made in most alloys, including exotics.


STEP WEDGES










Product description:

These Various Step block is the metric “A” version.
Variations of this block are available if additional steps are preferred.
Also, larger step faces are offered for use with large diameter transducers.
In accordance with ASTM E797.
Also 90° Curved Step block is machined from solid 2″ diameter bar with Various step thicknesses.
Materials: carbon steel, Aluminium, SS

To know more details please CLICK

Comments

Post a Comment

Popular posts from this blog

Ultrasonic Testing Level 1 (UT-1) General &Specific Examination MCQ questions

ULTRASONIC TESTING (UT) Ultrasonic Testing Level 1 (UT-1) General Examination 1.       The divergence of an ultrasonic beam is dependent on: (a) Transducer wavelength and diameter (b) Test specimen density (c) The sound wave's angle of incidence (d) The degree of damping of the ultrasonic transducer 2. When a longitudinal wave is incident upon an inclined interface between zero degrees and the first critical angle: (a) The sound beam is totally reflected (b) Only shear waves are produced in the second material (c) Shear waves and longitudinal waves are produced in the second material (d) Only longitudinal waves are produced in the second material 3. The piezoelectric material in a search unit which vibrates to produce ultrasonic waves is called: (a) A backing material (b) A lucite wedge (c) A transducer element or crystal (d) A couplant 4. When a longitudinal wave is incident upon an inclined interface and is refracted at ninety degre
Read more

Image Quality Indicator (IQI) wire type

Image
Image Quality Indicator (IQI) wire type Product description: Available in wire length: 50 mm 25mm 10mm (2”,1”,3/8”) material: Standard stainless steel (for all steels), Aluminium, Copper (Nickel, Inconel, Titanium available upon Request) A} WIRE TYPE 1QI’S AS PER EN – 462 – 11 FE EN, 6FE EN, 10 FE EN, 13FE EN B} WIRE TYPE 1QI’S AS PER EN – 747 Set A, Set B, Set C, Set, D C} WIRE TYPE 1QI’S AS PER1     BRITISH STANDARDS BS- 379 D} WIRE TYPE 1QI’S AS PER IS – 3657      FE-1, FE-2, FE-3, FE-4, FE-5 Cranking Unit Product description: Available in various specifications, the offered product is highly appreciated in the market for its unmatched quality. Our offered product is not only manufactured using advanced technology but also verified on various quality parameters to ensure its flawlessness.   Guide tube and extension tube Product description: Source Guide Tube – 2 Meters long Extension Tube – 2 Meters long  Personal protection items
Read more

PENETRANT TESTING MATERIALS

Image
Penetrant Testing Materials The penetrant materials used today are much more sophisticated than the kerosene and whiting first used by railroad inspectors near the turn of the 20th century.  Today's penetrants are carefully formulated to produce the level of sensitivity desired by the inspector.  To perform well, a penetrant must possess a number of important characteristics. A penetrant must: spread easily over the surface of the material being inspected to provide complete and even coverage. be drawn into surface breaking defects by capillary action. remain in the defect but remove easily from the surface of the part. remain fluid so it can be drawn back to the surface of the part through the drying and developing steps. be highly visible or fluoresce brightly to produce easy to see indications. not be harmful to the material being tested or the inspector. All penetrant materials do not perform the same and are not designed to perform the same. Penetrant man
Read more